Ran wires out to mast. This includes; steaming light, radome power, and the VHF antenna cable. I am not changing the existing anchor light wiring on the mast but it will now be part of the nav-lights cluster in the dash. So all wiring aft of the wheel house has been run but more work needs to be done to connect some of them. I will cover/hide the wiring after I test the system.
The radome power will get connected at a later date – when I ‘spring’ for the radome, chartplotter and new transducer. This should happen the next time the boat is out (or at least the new transducer should get done then).